Installation Instructions

Please click on picture for a larger version	Please click on picture for a larger version	Please click on picture for a larger version
First place your item to the post and fix using the screws provided, then place the slide pin over the side to be connected.	Pass the tape behind the back of the tensioner metal and in between the slide pin.	Pass the tape back over the front of the slide pin and back behind the tensioner metal.
Please click on picture for a larger version	Please click on picture for a larger version	Please click on picture for a larger version
Now tension the tape as required	Pass the tape around the front of the slide pin and thread through the centre of the slide pin.	Pull the excess through and pull tight and place the C clip over both tapes as shown.

click here to view printable version of above instructions

Please click on picture for a larger version	Please click on picture for a larger version
For the gate contact kit, please start with the hinge section as displayed above.  Cut an 18 inch piece of tape to make your hinge with.  Using the tying instructions connect both sides of the hinge, then connect the existing tape from your fence to the hinge and pull tight.	Next attach your gate contacts as shown above making sure that the contacts are pressing against each other.  Then attach the tape section from your hinge side of the gate onto the gate contact and tension. Then connect the existing fence tape to your other gate contact.

click here to view printable version of above instructions